Product Reviews

SMALLRIG Universal Phone Holder Mount Review

A flexible phone clamp for creators who want to mount a compatible smartphone on a camera or tripod and add a light or microphone.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SMALLRIG Universal Phone Holder Mount review is for creators looking for a simple way to place a phone on a camera or tripod while keeping a cold shoe available for an accessory.

Its adjustable joints and portrait-to-landscape rotation make it a flexible option for filming, streaming, interviews, and other phone-based setups.

SMALLRIG Phone Holder Review Summary

The quick verdict

SMALLRIG Universal Phone Holder Mount 4382
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG Universal Phone Holder Mount 4382

A flexible phone clamp for creators who want to mount a compatible smartphone on a camera or tripod and add a light or microphone.

  • Fits smartphones 57–88 mm wide; checking the width with a case attached can help confirm fit.
  • Attaches through a 1/4-inch-20 threaded hole or a cold shoe at the bottom.
  • Rotates between landscape and portrait modes and locks when turned 90 degrees.
  • Two rotary joints provide up to 180 degrees of adjustment.

Pros

  • Combines a phone clamp with two common camera-rig mounting options.
  • Supports portrait and landscape framing, with articulated adjustment for positioning.

Consider before buying

  • The 500 g load limit calls for checking the weight of the phone and any attached accessories together.
  • Phone fit depends on width, so buyers using a thick case should check the combined measurement before purchasing.
Read the full review summary

The 4382 combines a phone clamp with a camera and tripod mounting base.

Its 1/4-inch-20 threaded hole and cold shoe at the bottom give buyers two mounting routes, while a separate cold shoe on top can accommodate a microphone or light.

Threaded holes in the body also support compatible SMALLRIG power bank holders, which can help build a more involved phone rig.

It suits creators who prefer a clamp over a magnetic attachment and want to adjust phone framing without changing the whole support.

The clamp fits phones 57–88 mm wide, and the 500 g load capacity is a key limit to keep in mind when planning the complete setup.

The package includes one phone holder, so any camera, tripod, microphone, or light must be sourced separately.

The buying factors

SMALLRIG Phone Holder Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Mounting flexibility

A 1/4-inch-20 threaded hole and a cold shoe at the base offer two ways to attach the holder to a camera or tripod.

8/10

Phone fit range

The 57–88 mm width range covers many smartphones, though buyers should measure their phone with its case.

8/10

Framing adjustment

Two rotary joints support 180-degree adjustment, and the holder locks when rotated 90 degrees between orientations.

8/10

Accessory integration

A top cold shoe and spaced threaded holes support add-ons such as a microphone, light, or compatible power bank holder.

6/10

Load planning

The 500 g maximum provides a clear planning boundary, so the combined phone and accessories need to stay within it.

9/10

Carry weight

At 73 g, the holder itself adds little weight to a compact filming kit.

Key Features and Specifications of SMALLRIG Phone Holder

  • Fits smartphones 57–88 mm wide; checking the width with a case attached can help confirm fit.
  • Attaches through a 1/4-inch-20 threaded hole or a cold shoe at the bottom.
  • Rotates between landscape and portrait modes and locks when turned 90 degrees.
  • Two rotary joints provide up to 180 degrees of adjustment.
  • A top cold shoe accommodates a microphone or light.
  • Spaced threaded holes support compatible power bank holders; maximum load capacity is 500 g.
  • The holder weighs 73 g, and the package includes one phone holder.

Pros and Cons of SMALLRIG Phone Holder

Pros

  • Combines a phone clamp with two common camera-rig mounting options.
  • Supports portrait and landscape framing, with articulated adjustment for positioning.
  • Offers a top cold shoe for adding a microphone or light.
  • Its stated phone-width range suits a broad range of handset sizes.

Consider before buying

  • The 500 g load limit calls for checking the weight of the phone and any attached accessories together.
  • Phone fit depends on width, so buyers using a thick case should check the combined measurement before purchasing.
  • The package includes only the phone holder, so the rest of the camera or tripod setup must be supplied separately.

Who Should Buy SMALLRIG Phone Holder?

Good fit

Consider the 4382 if you want to mount a smartphone on a camera or tripod and prefer a clamp that can switch between portrait and landscape.

The threaded base and lower cold shoe give you a choice of attachment points, while the top cold shoe makes room for a small microphone or light.

It is also a practical fit for a modular phone rig: the two rotary joints can help position the screen, and the threaded holes can support compatible power bank holders.

Before assembling the setup, check phone width with its case and keep the combined load within 500 g.

For a lightweight kit, the holder’s 73 g weight is appealing. Plan separately for the camera or tripod and any accessories, since only the phone holder is included.

Who should skip it

Look elsewhere if your intended phone and accessories together exceed the 500 g limit, or if your phone with its case falls outside the 57–88 mm width range.

This clamp may not suit you if you want a phone mount that attaches by magnetic connection. Check that a clamp-style holder fits the way you plan to use your phone and rig.

How the SMALLRIG Phone Holder fits a creator rig

Mounting it to a camera or tripod

The 4382 has both a 1/4-inch-20 threaded hole and a cold shoe at its base, giving buyers different ways to attach it to compatible camera or tripod hardware.

This is useful when a creator already works with one of those interfaces, but the mounting point should match the support being used.

Confirm that the intended camera or tripod has a compatible connection before building the rest of the rig around it.

Choosing orientation and angle

The holder switches between landscape and portrait and locks when rotated 90 degrees. Two rotary joints offer up to 180 degrees of adjustment, so the phone can be positioned for different framing needs while the base stays mounted.

Buyers who record both vertical and horizontal video may find this more convenient than removing and remounting the holder for each orientation.

Planning phone fit and total load

The stated fit range is based on phone width, from 57 to 88 mm. Case thickness can affect that measurement, so measure the handset as it will actually be used.

The 500 g maximum applies to load planning; account for the phone and any mounted accessories together rather than considering the phone alone.

Adding accessories thoughtfully

A cold shoe on top is intended for a microphone or light, and spaced threaded holes can be used with compatible SMALLRIG power bank holders. These interfaces add flexibility, but each accessory changes the setup’s weight and balance.

Start with the phone and the accessory you need most, then check that the complete arrangement remains within the stated capacity.

Alternatives to SMALLRIG Phone Holder

Cell Phone Camera Mounts alternative

SMALLRIG Magnetic Metal Phone Mount 5156
4.6/5

700+ ratings

Read Amazon Reviews

SMALLRIG Magnetic Metal Phone Mount 5156

Choose the 4382 if you want a clamp based on phone width and a built-in top cold shoe for a microphone or light.

The 5156 is worth considering if your iPhone supports MagSafe and you prefer its magnetic mounting approach and detachable accessory plate; check its stated warning that external impacts may cause detachment.

  • The 5156 is designed for iPhone models with MagSafe functionality.
  • It has two rotating shafts, multiple threaded holes, a detachable top mounting plate, and includes an Allen wrench; its stated load capacity is 500 g.
  • The 4382 uses a width-adjustable clamp for phones measuring 57–88 mm and provides a top cold shoe plus threaded accessory holes.

Is SMALLRIG Phone Holder Worth It?

The SMALLRIG Universal Phone Holder Mount 4382 is worth considering for creators who want an adjustable phone clamp with camera and tripod mounting options, portrait-to-landscape rotation, and a top cold shoe.

Its 73 g weight and modular attachment points suit compact rigs that need flexible framing.

Before choosing it, check phone width with the case attached and plan the phone-plus-accessory load against the 500 g maximum.

If those limits suit your setup and you already have compatible camera or tripod support, the 4382 offers a useful, configurable foundation for phone filming.

Your review at a glance

SMALLRIG Universal Phone Holder Mount 4382
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG Universal Phone Holder Mount 4382

A flexible phone clamp for creators who want to mount a compatible smartphone on a camera or tripod and add a light or microphone.

  • Fits smartphones 57–88 mm wide; checking the width with a case attached can help confirm fit.
  • Attaches through a 1/4-inch-20 threaded hole or a cold shoe at the bottom.
  • Rotates between landscape and portrait modes and locks when turned 90 degrees.
  • Two rotary joints provide up to 180 degrees of adjustment.

Written by

creativelittleparties.com Editorial Team

Editorial team

Independent editorial coverage of parties & making.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SMALLRIG Universal Phone Holder Mount 4382

SMALLRIG Universal Phone Holder Mount 4382

A flexible phone clamp for creators who want to mount a compatible smartphone on a camera or tripod and add a light or microphone.

  • Fits smartphones 57–88 mm wide; checking the width with a case attached can help confirm fit.
  • Attaches through a 1/4-inch-20 threaded hole or a cold shoe at the bottom.
Check Video Reviews on Amazon