The SmallRig Super Clamp review centers on a compact mounting base for attaching compatible camera accessories to rods, shelves, hooks, and other suitable surfaces.
Its adjustable jaw and 1/4-inch and 3/8-inch threaded holes make it worth considering when a fixed mounting point is more useful than an articulating arm.
SmallRig Super Clamp Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A useful fit for creators who need a compact clamp with standard threaded points for mounting compatible camera accessories to suitable surfaces.
- Adjustable jaw opens to about 40 mm and closes to a minimum of 15 mm; intended for surfaces within that thickness range.
- 1/4-inch and 3/8-inch threaded holes support attachment of compatible accessories.
- Rubber pads on the clamp parts are designed to help prevent slipping and scratching.
- Constructed from aluminum alloy and stainless steel.
Pros
- The 15–40 mm jaw range makes it adaptable to several kinds of mounting surfaces.
- Two common thread sizes expand compatibility with suitable camera accessories.
Consider before buying
- The clamp is supplied on its own, so a ball head, arm, or other accessory may be needed for the intended setup.
- Its jaw range rules out surfaces thinner than 15 mm or thicker than about 40 mm.
Read the full review summary
This clamp is designed to grip objects between about 15 mm and 40 mm thick. Rubber pads line the clamp contact areas, while its aluminum alloy and stainless steel construction gives it a metal-bodied design.
Threaded 1/4-inch and 3/8-inch holes provide attachment points for compatible accessories such as a ball head or magic arm.
It suits photographers and video creators who already have compatible mounting accessories and want to secure them to a nearby bar, shelf, hook, or similar surface.
The clamp itself is the included item, so buyers should check their accessory’s thread and the surface dimensions before choosing it.
Its stated maximum weight recommendation is 3.3 pounds; treat that as a limit to respect, not a guarantee for every mounting arrangement.
The buying factors
SmallRig Super Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Jaw range
The approximately 15–40 mm range accommodates a useful selection of appropriately sized surfaces.
Accessory connections
Both 1/4-inch and 3/8-inch threaded holes offer flexibility with compatible mounting gear.
Contact protection
Rubber pads are designed to help reduce slipping and scratching where the clamp meets a surface.
Build materials
Aluminum alloy and stainless steel give the clamp a metal construction.
Ready-to-use setup
The package includes one clamp, so a compatible accessory may be needed to complete a mounting setup.
Load guidance
The stated 3.3-pound maximum is useful context, though the suitable load also depends on the accessory and mounting position.
Key Features and Specifications of SmallRig Super Clamp
- Adjustable jaw opens to about 40 mm and closes to a minimum of 15 mm; intended for surfaces within that thickness range.
- 1/4-inch and 3/8-inch threaded holes support attachment of compatible accessories.
- Rubber pads on the clamp parts are designed to help prevent slipping and scratching.
- Constructed from aluminum alloy and stainless steel.
- Compact, lightweight format, with a listed item weight of 0.13 kg.
- One super clamp is included; the stated maximum weight recommendation is 3.3 pounds.
Pros and Cons of SmallRig Super Clamp
Pros
- The 15–40 mm jaw range makes it adaptable to several kinds of mounting surfaces.
- Two common thread sizes expand compatibility with suitable camera accessories.
- Rubber contact pads are a thoughtful touch for grip and surface protection.
- Metal construction keeps the clamp compact without relying on a bulky support.
Consider before buying
- The clamp is supplied on its own, so a ball head, arm, or other accessory may be needed for the intended setup.
- Its jaw range rules out surfaces thinner than 15 mm or thicker than about 40 mm.
- The 3.3-pound maximum weight recommendation calls for care when choosing the attached equipment and mounting position.
Who Should Buy SmallRig Super Clamp?
Good fit
Consider it if you need a simple way to anchor compatible camera gear to a bar, shelf, hook, or another surface that falls within the jaw range.
The threaded holes give you options for building around accessories you already own, and the rubber pads are intended to protect the contact area while helping the clamp hold.
Before buying, measure the surface where you plan to mount it and confirm that your accessory uses a compatible thread.
Also account for the complete mounted setup when checking the stated 3.3-pound maximum; a long or angled accessory may put different demands on the clamp than a compact item mounted close to it.
Who should skip it
Skip it if your mounting surface is outside the approximately 15–40 mm jaw range, or if you need an articulating arm included in the package.
This is a clamp and threaded mounting base; plan on supplying any additional positioning hardware your setup requires.
How the SmallRig Super Clamp Fits a Camera Setup
Check the jaw against your mounting surface
The clamp’s opening range is one of the most important fit checks.
Measure the bar, shelf edge, or other target before buying: a surface must be thicker than 15 mm and no more than about 40 mm for the described jaw range.
A snug fit within that range makes the clamp’s intended use more straightforward.
Plan the accessory connection
The 1/4-inch and 3/8-inch threaded holes let the clamp serve as a base for compatible accessories, including the specified ball head and magic arm examples.
Confirm which thread your accessory needs and whether it supplies the angle or reach you want; the clamp itself does not include those add-ons.
Treat the weight recommendation as a setup constraint
The stated maximum weight recommendation is 3.3 pounds. Use that figure as an upper boundary when considering attached equipment, and account for the way the accessory extends from the mounting point.
For a heavier setup, check whether another mounting solution better matches the load and arrangement.
Consider the contact surfaces
Rubber pads are intended to help reduce slipping and scratching at the clamp’s contact points.
That can be useful when mounting against a finished surface, but a buyer should still choose a stable, appropriately sized mounting point and check that the clamp is seated as intended before attaching equipment.
Alternatives to SmallRig Super Clamp
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Magic Arm Clamp Kit
Choose the main clamp if you already have an arm or want a compact mounting base. Choose the kit if you need both the clamp and an articulating arm and its wider jaw range suits your surface.
- This kit combines a clamp with a 9.8-inch articulating arm, with 1/4-inch screws at both arm ends and a clamp jaw range of 15–54 mm.
- The SmallRig Super Clamp provides the clamp and threaded holes, while the package includes one clamp only.
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Super Clamp Mount
The main clamp is a better fit when you want threaded attachment points and already have positioning hardware.
The double ball head model is more convenient when its included articulated mounting arrangement and action camera adapter match your setup.
- This mount combines a clamp with a double ball head, a 1/4-inch screw, and an action camera mount adapter; its stated weight capacity is up to 1.5 kg.
- The main clamp has 1/4-inch and 3/8-inch threaded holes and a jaw range of about 15–40 mm.
Is SmallRig Super Clamp Worth It?
The SmallRig Super Clamp is worth considering as a compact mounting base when your surface fits its approximately 15–40 mm jaw range and your accessories match its threaded holes.
Its rubber pads and metal construction add practical detail to a straightforward design.
Check the surface dimensions, accessory threads, and complete setup weight before choosing it.
The package is one clamp, so buyers who need an arm or ball head should make sure they have compatible hardware or select a kit that includes the positioning parts.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A useful fit for creators who need a compact clamp with standard threaded points for mounting compatible camera accessories to suitable surfaces.
- Adjustable jaw opens to about 40 mm and closes to a minimum of 15 mm; intended for surfaces within that thickness range.
- 1/4-inch and 3/8-inch threaded holes support attachment of compatible accessories.
- Rubber pads on the clamp parts are designed to help prevent slipping and scratching.
- Constructed from aluminum alloy and stainless steel.