Product Reviews

SmallRig Field Monitor Mount Holder Review

A compact adjustable mount for camera operators who want to position a 5- or 7-inch monitor on a camera cage or handle.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Field Monitor Mount Holder review centers on a compact cold shoe mount for positioning a 5- or 7-inch camera monitor on a cage or handle.

Its adjustable tilt and swivel make it a practical option when framing flexibility matters, provided the monitor and mounting angle stay within the stated load limits.

SmallRig Monitor Mount Review Summary

The quick verdict

SmallRig Field Monitor Mount Holder
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Field Monitor Mount Holder

A compact adjustable mount for camera operators who want to position a 5- or 7-inch monitor on a camera cage or handle.

  • Designed to support 5- and 7-inch camera monitors using a cold shoe on a camera cage or handle.
  • The monitor can tilt up to 180 degrees and swivel 360 degrees.
  • A thumb screw adjusts tilt tension; an Allen wrench adjusts swivel tension.
  • Locating pins and a silicone pad are designed to help secure compatible monitors and reduce scratching or twisting.

Pros

  • Broad tilt and swivel movement helps place a monitor for different shooting positions.
  • Thumb-adjustable tilt tension is convenient when changing the monitor angle.

Consider before buying

  • Permitted load drops at some tilt angles, so buyers need to check the relevant limit for their chosen position.
  • Swivel tension is adjusted with the supplied Allen wrench rather than the thumb screw used for tilt.
Read the full review summary

This mount combines a cold shoe base with a 1/4-inch screw on top, so it can attach to a camera cage or handle and support a monitor or another small accessory.

The head tilts up to 180 degrees and swivels 360 degrees, while a thumb screw adjusts tilt tension without reaching for an Allen wrench.

It is best suited to creators building a compact camera rig around a 5- or 7-inch monitor, especially those who want to reposition the display while shooting.

The locating pins and silicone pad are useful design details for compatible monitors, but the allowable load changes with tilt angle, so buyers should match their monitor and preferred position to the listed limits.

The buying factors

SmallRig Monitor Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Angle adjustment

Up to 180-degree tilt and 360-degree swivel give broad positioning options.

8/10

Tilt control

Tilt tension can be adjusted quickly with a thumb screw.

8/10

Mounting flexibility

The cold shoe base and bottom 1/4-inch threaded hole provide two connection approaches.

8/10

Monitor fit

Designed for 5- and 7-inch monitors, with locating pins and a silicone pad.

7/10

Load guidance

Angle-specific limits are useful, though they require buyers to check their setup carefully.

9/10

Rig footprint

At 76 grams with a folded size of 78 × 67 × 42 mm, it is a compact mounting component.

Key Features and Specifications of SmallRig Monitor Mount

  • Designed to support 5- and 7-inch camera monitors using a cold shoe on a camera cage or handle.
  • The monitor can tilt up to 180 degrees and swivel 360 degrees.
  • A thumb screw adjusts tilt tension; an Allen wrench adjusts swivel tension.
  • Locating pins and a silicone pad are designed to help secure compatible monitors and reduce scratching or twisting.
  • The base has a cold shoe adapter and a 1/4-inch threaded hole for connection to a magic arm or stabilizer.
  • The top 1/4-inch screw can support a monitor, microphone, light, or other compatible accessory.
  • Listed load limits vary by tilt: under 9.3 pounds at 90 degrees, under 5.5 pounds at 45 degrees, and under 5 pounds at 30 degrees. The instructions also call for retightening the 1/4-inch knurled screw with the Allen wrench.

Pros and Cons of SmallRig Monitor Mount

Pros

  • Broad tilt and swivel movement helps place a monitor for different shooting positions.
  • Thumb-adjustable tilt tension is convenient when changing the monitor angle.
  • Cold shoe and 1/4-inch threaded connections accommodate common rig mounting points.
  • Locating pins and a silicone contact pad address monitor movement and surface contact.
  • Compact dimensions and low weight suit a small camera rig.

Consider before buying

  • Permitted load drops at some tilt angles, so buyers need to check the relevant limit for their chosen position.
  • Swivel tension is adjusted with the supplied Allen wrench rather than the thumb screw used for tilt.
  • The 1/4-inch knurled screw needs an Allen-wrench retightening step for added security.

Who Should Buy SmallRig Monitor Mount?

Good fit

Consider it if your rig has a compatible cold shoe and you want to position a 5- or 7-inch monitor without adding a long articulating arm.

The small footprint and wide movement range make it suited to setups where the display needs to shift between shooting angles.

It may also fit a rig that uses a 1/4-inch threaded connection at the bottom.

Before choosing, check whether your cage, handle, magic arm, or stabilizer presents the connection you intend to use, then confirm that the monitor's weight is within the limit for the angle you plan to hold.

The mount is particularly worth considering if you expect to adjust tilt regularly: its thumb screw makes that tension adjustment accessible. Keep the Allen wrench available for swivel adjustment and for the specified retightening of the knurled screw.

Who should skip it

Look elsewhere if your setup calls for a longer arm or a clamp that can attach around a rod, tube, or table edge. This is a compact monitor mount built around cold shoe and 1/4-inch connections.

It is also a poor fit if your monitor and intended angle exceed the corresponding load limit. Compare the monitor's weight with the angle-specific guidance before mounting it.

How the SmallRig Monitor Mount Fits a Camera Rig

Angle range and tension

The 180-degree tilt and 360-degree swivel let you orient the display across a wide range of positions. Tilt and swivel use different tension controls: the thumb screw handles tilt, while an Allen wrench adjusts swivel.

That division makes frequent tilt changes straightforward, but the wrench remains part of the setup for other adjustments.

Connections and monitor contact

The cold shoe base is intended for a cage or handle, and the bottom also includes a 1/4-inch threaded hole for connections such as a magic arm or stabilizer.

At the top, a 1/4-inch screw supports a monitor or another compatible accessory.

Locating pins and a silicone pad are meant to help limit twisting and scratching, so check the monitor's mounting surface and pin layout before relying on those features.

Load depends on the angle

The stated load limits vary with tilt: the highest listed figure applies at 90 degrees, with lower limits at 45 and 30 degrees.

A monitor that appears within the broad maximum may still exceed the limit for its working position. Weigh the complete device you plan to mount and use the limit that matches the actual angle.

A compact component, not a longer reach arm

The mount weighs 76 grams and folds to 78 × 67 × 42 mm, which keeps the component small in a rig bag and on a camera setup.

That compact format suits direct monitor positioning near the cage or handle. If the display needs more distance from the camera, confirm whether your rig has an additional arm or support that provides the reach you need.

Alternatives to SmallRig Monitor Mount

Camera Mounts & Clamps alternative

SmallRig Camera Monitor Mount 6313
4.7/5

800+ ratings

Read Amazon Reviews

SmallRig Camera Monitor Mount 6313

Compare the 6313 if portrait mounting or a retractable locating screw is important to your rig. The Field Monitor Mount Holder remains a suitable fit when its listed monitor size and angle-dependent load guidance meet your needs.

  • The 6313 also provides 180-degree tilt and 360-degree pan, and its description specifies horizontal and vertical monitor installations.
  • It has a bottom cold shoe and a bottom 1/4-inch threaded hole, plus a retractable 1/4-inch locating screw on top and thumb-adjustable tilt damping.
  • The Field Monitor Mount Holder offers 180-degree tilt, 360-degree swivel, a cold shoe base, and a bottom 1/4-inch threaded hole, with angle-specific load limits.

Camera Mounts & Clamps alternative

SmallRig 9.8-Inch Articulating Magic Arm 2066B
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig 9.8-Inch Articulating Magic Arm 2066B

Choose between them based on how you want to place the display: the Field Monitor Mount Holder is the more compact direct mount, while the 2066B offers a longer arm for extending an accessory away from its attachment point.

Check the arm's stated weight recommendation against your device.

  • The 2066B is a 9.8-inch articulating arm with 1/4-inch screws at both ends and double 360-degree ball heads.
  • It is intended for positioning monitors, lights, and other accessories, with a rubber cushion at the monitor screw.
  • The Field Monitor Mount Holder is a compact mount with a cold shoe base, a top 1/4-inch screw, and up to 180-degree tilt and 360-degree swivel.

Is SmallRig Monitor Mount Worth It?

The SmallRig Field Monitor Mount Holder is worth considering for a compact camera rig that needs a 5- or 7-inch monitor positioned from a cold shoe or compatible 1/4-inch connection.

Its generous adjustment range, thumb-controlled tilt tension, and padded locating design address useful everyday mounting needs.

Before buying, confirm the connection on your cage or handle and check the angle-specific load limit for your monitor.

If those details fit your setup, this mount offers a focused way to adjust monitor placement without a long arm.

Your review at a glance

SmallRig Field Monitor Mount Holder
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Field Monitor Mount Holder

A compact adjustable mount for camera operators who want to position a 5- or 7-inch monitor on a camera cage or handle.

  • Designed to support 5- and 7-inch camera monitors using a cold shoe on a camera cage or handle.
  • The monitor can tilt up to 180 degrees and swivel 360 degrees.
  • A thumb screw adjusts tilt tension; an Allen wrench adjusts swivel tension.
  • Locating pins and a silicone pad are designed to help secure compatible monitors and reduce scratching or twisting.

Written by

creativelittleparties.com Editorial Team

Editorial team

Independent editorial coverage of parties & making.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Field Monitor Mount Holder

SmallRig Field Monitor Mount Holder

A compact adjustable mount for camera operators who want to position a 5- or 7-inch monitor on a camera cage or handle.

  • Designed to support 5- and 7-inch camera monitors using a cold shoe on a camera cage or handle.
  • The monitor can tilt up to 180 degrees and swivel 360 degrees.
Check Video Reviews on Amazon